ADuCM355

Vendor Web: Analog Devices

download svd file

All devices of this Vendor

Name : ADuCM355

Flash : 128 kB

Flash bank : 0x20000 Bytes @ 0x0

RAM : 8 kB

RAM : 0x00002000 Bytes @ 0x00002000

description : ARM Cortex-CM3 Microcontroller based device

Architecture

Architecture : ARM Cortex-M3 (CM3)

revision : r0p1

endian : little

Number of relevant bits in Interrupt priority : 3

Peripherals

name : AFE
description : Unknown
base address : 0x0
Interrupt (47) AFE_ERROR : AFE_ERROR
Interrupt (48) AFE_ADC : AFE_ADC
Interrupt (49) AFE_GEN : AFE_GEN
Interrupt (50) AFE_CMDFIFO : AFE_CMDFIFO
Interrupt (51) AFE_DATAFIFO : AFE_DATAFIFO
Interrupt (52) AFE_Watchdog : AFE_Watchdog
Interrupt (53) AFE_CRC : AFE_CRC
Interrupt (54) AFE_GPT0 : AFE_GPT0
Interrupt (55) AFE_GPT1 : AFE_GPT1

name : AFECON
description : Unknown
base address : 0x0

name : AFECRC
description : CRC Accelerator
base address : 0x0

name : AFEWDT
description : Unknown
base address : 0x0

name : AGPIO2
description : Unknown
base address : 0x0

name : AGPT0
description : General Purpose Timer
base address : 0x0
Interrupt (64) AGPT0_EVT : AGPT0_EVT

name : AGPT1
description : General Purpose Timer
base address : 0x0
Interrupt (65) AGPT1_EVT : AGPT1_EVT

name : ALLON
description : Always On Register
base address : 0x0

name : BUSM0
description : Bus matrix
base address : 0x0

name : CLKG0_CLK
description : Clocking
base address : 0x0

name : CLKG0_OSC
description : Clocking
base address : 0x0

name : CRC0
description : CRC Accelerator
base address : 0x0

name : CRYPT0
description : Cryptogaphic
base address : 0x0
Interrupt (38) CRYPT_EVT : Event

name : DMA0
description : DMA
base address : 0x0
Interrupt (19) DMA_CHAN_ERR : DMA Error
Interrupt (20) DMA0_CH0_DONE : Channel SPI1_TX Done
Interrupt (21) DMA0_CH1_DONE : Channel SPI1_RX Done
Interrupt (22) DMA0_CH2_DONE : Channel 2 Done
Interrupt (23) DMA0_CH3_DONE : Channel 3 Done
Interrupt (24) DMA0_CH4_DONE : Channel SPI0_TX Done
Interrupt (25) DMA0_CH5_DONE : Channel SPI0_RX Done
Interrupt (26) DMA0_CH6_DONE : Channel 6 Done
Interrupt (27) DMA0_CH7_DONE : Channel 7 Done
Interrupt (28) DMA0_CH8_DONE : Channel UART_TX Done
Interrupt (29) DMA0_CH9_DONE : Channel UART_RX Done
Interrupt (30) DMA0_CH10_DONE : Channel I2C0_STX Done
Interrupt (31) DMA0_CH11_DONE : Channel I2C0_SRX Done
Interrupt (32) DMA0_CH12_DONE : Channel I2C0_MX Done
Interrupt (33) DMA0_CH13_DONE : Channel AES_IN_Done
Interrupt (34) DMA0_CH14_DONE : Channel AES_OUT_Done
Interrupt (35) DMA0_CH15_DONE : Channel FLASH0_Done
Interrupt (56) DMA0_CH16_DONE : AFE_DMA_CMDFIFO
Interrupt (57) DMA0_CH17_DONE : AFE_DMA_DATAFIFO
Interrupt (58) DMA0_CH18_DONE : Channel 18 Done
Interrupt (59) DMA0_CH19_DONE : Channel 19 Done
Interrupt (60) DMA0_CH20_DONE : Channel 20 Done
Interrupt (61) DMA0_CH21_DONE : Channel 21 Done
Interrupt (62) DMA0_CH22_DONE : Channel 22 Done
Interrupt (63) DMA0_CH23_DONE : Channel 23 Done

name : FLCC0
description : Flash Controller
base address : 0x0

name : FLCC0_CACHE
description : Cache Controller
base address : 0x0

name : GPIO0
description : Unknown
base address : 0x0

name : GPIO1
description : Unknown
base address : 0x0

name : GPIO2
description : Unknown
base address : 0x0

name : I2C0
description : I2C Master/Slave
base address : 0x0
Interrupt (17) I2C_SLV_EVT : Slave Event
Interrupt (18) I2C_MST_EVT : Master Event

name : NVIC0
description : Cortex-M3 Interrupt Controller
base address : 0x0

name : PMG0
description : Power Management
base address : 0x0
Interrupt (6) PMG0_VREG_OVR : Voltage Regulator (VREG) Overvoltage
Interrupt (7) PMG0_BATT_RANGE : Battery Voltage (VBAT) Out of Range

name : PMG0_TST
description : Power Management
base address : 0x0

name : RNG0
description : Random Number Generator
base address : 0x0
Interrupt (44) RNG0_EVT : RNG0_EVT

name : RTC0
description : Real-Time Clock
base address : 0x0
Interrupt (8) RTC0_EVT : RTC0 Event

name : RTC1
description : Real-Time Clock
base address : 0x0
Interrupt (0) RTC1_EVT : Event

name : SPI0
description : Serial Peripheral Interface
base address : 0x0
Interrupt (15) SPI0_EVT : Event

name : SPI2
description : Serial Peripheral Interface
base address : 0x0

name : SYS
description : System Identification and Debug Enable
base address : 0x0
Interrupt (9) SYS_GPIO_INTA : GPIO Interrupt A
Interrupt (10) SYS_GPIO_INTB : GPIO Interrupt B

name : TMR0
description : General Purpose Timer
base address : 0x0
Interrupt (11) TMR0_EVT : Event

name : TMR1
description : General Purpose Timer
base address : 0x0
Interrupt (12) TMR1_EVT : Event

name : TMR2
description : General Purpose Timer
base address : 0x0
Interrupt (40) TMR2_EVT : Event

name : UART0
description : Unknown
base address : 0x0
Interrupt (14) UART_EVT : Event

name : WDT0
description : Watchdog Timer
base address : 0x0
Interrupt (5) WDT_EXP : Digital Die Watchdog

name : XINT0
description : External interrupt configuration
base address : 0x0
Interrupt (2) XINT_EVT1 : External Wakeup Interrupt n
Interrupt (4) AFE_EVT3 : AFE Interrupt


Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.